| Peer-Reviewed

Ultra High Vacuum Chemical Vapor Deposition Techniques for Economic Growth of Silicon Nanowires

Received: 23 July 2021     Accepted: 6 August 2021     Published: 11 August 2021
Views:       Downloads:
Abstract

Ultra High Vacuum Chemical Vapor Deposition (UHVCVD) reactor has been used to grow silicon nanowires via innovative economical approaches using chemical active materials as catalysts such as aluminum. Scanning Electron Microscopy has been used to study the success of the growth for further investigations and advanced applications such as solar cells. Solar manufacturers are looking for approaches to improve yield and cell efficiency and lower manufacturing costs overall. One of the main goals of this project is to tear down the various parameters involved in the current photovoltaic panels and improve it in one or more directions (properties, performance, costs). The current study is addressing the solar market with special concern of the efficiency goal. The mechanical flexibility of plastic materials is of high demands for all photovoltaic applications onto curved surfaces for architectural integration. Polycarbonate AND/OR poly methyl methacrylate encapsulation of photovoltaic modules and usage to fabricate advanced silicon nanowires solar cells can be emerging technologies delivering excellent performance and durability at a competitive cost. Although solar panels with glass protective facing still account for the majority of the installations of photovoltaic modules, however, it is expected that the adaptation of these new technologies will rapidly gain market share. The growth of silicon nanowires using chemical vapor deposition to fabricate advanced solar cells can be done via two innovative approaches. Alternative techniques for lithographic formation of the mask can provide advantages for low-cost processing, especially where a simple repeating pattern is required.

Published in American Journal of Nanosciences (Volume 7, Issue 2)
DOI 10.11648/j.ajn.20210702.12
Page(s) 42-48
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2021. Published by Science Publishing Group

Keywords

Silicon, Nanowires, Ultra High Vacuum Chemical Vapour Deposition, Photovoltaic, Scanning Electron Microscopy

References
[1] B. J. Huang, T. H. Lin, W. C. Hung and F. S. Sun, Performance evaluation of solar photovoltaic/thermal systems, Solar Energy Volume 70, Issue 5, 2001, Pages 443-448.
[2] Li Gong, Jianguo Lu and Zhizhen Ye, Transparent and conductive Ga-doped ZnO films grown by RF magnetron sputtering on polycarbonate substrates, Solar Energy Materials and Solar Cells Volume 94, Issue 6, June 2010, Pages 937-941.
[3] C. J. Brabec, N. S. Sariciftci & J. C. Hummelen, Plastic solar cells. Advanced Functional Materials, 11 (1), 2001, 15-26.
[4] W. R. Zeng, S. F. Li, W. K. Chow, Preliminary Studies on Burning Behavior of Polymethylmethacrylate (PMMA), Journal of Fire Sciences. 20 (4), 2002, 297–317.
[5] B. A. Wacaser, M. C. Reuter, M. M. Khayyat, C. Y. Wen, R. Haight, S. Guha, F. M. Ross, Growth Systems, Structure, and Doping of Aluminum Seeded Epitaxial Silicon Nanowires, Nano letters, Vol 9, 2009.
[6] M. M. Khayyat, B. Aissa, E. H. Abdul-Hafidh, M. Nedil, Controlled-Crystal-Growth and Structures of Silicon Nanowires for Smart Applications, SDRP Journal of Nanotechnology & Material Science, 2015.
[7] M. Khayyat, B. Wacaser, M. Reuter, F. Ross, D. Sadana and Tze Chin, Nanoscale chemical templating of Si-NWs seeded with Al, Nanotechnology 24, 2013, 235301.
[8] M. Khayyat, B. Wacaser, D. Sadana, Nanoscale chemical templating with oxygen reactive materials, USPTO Patent number 8349715.
[9] H. J. Fan, P. Werner and M. Zacharias, Semiconductor nanowires: from self-organization to patterned growth, Small 2, 2006, 700–17.
[10] B. A. Wacaser, M. M. Khayyat, M. C. Reuter, D. K. Sadana, F. M. Ross, Technical advantages and challenges for core-shell micro/ nanowire large area PV devices, Photovoltaic Specialists Conference (PVSC), 35th IEEE, 2010.
[11] B. A. Wacaser, M. C. Reuter, M. M. Khayyat, R. Haight, S. Guha and F. M. Ross, The Role of Microanalysis in Micro/Nanowire-Based Future Generation Photovoltaic Devices, Microscopy and Microanalysis, Volume 16, Supplement S2, 2010.
[12] M. M. Khayyat, B. A. Wacaser, M. C. Reuter, D. K Sadana, Templating silicon nanowires seeded with oxygen reactive materials, Saudi International Electronics, Communications and Photonics Conference (SIECPC), 2011.
[13] Y. Huang and C. M. Lieber, Integratednanoscale electronics and optoelectronics: exploring nanoscale science and technology through semiconductor nanowires Pure Appl. Chem. 76, 2004 2051–68.
[14] B. M. Kayes, H. A. Atwater and N. S. Lewis, Comparisonof the device physics principles of planar and radial p–n junction nanorod solar cells J. Appl. Phys. 97, 2005, 114302.
[15] M. Law, J. Goldberger and P. D. Yang, Semiconductor nanowires and nanotubes Annu. Rev. Mater. Res. 34, 2004, 83–122.
[16] L. Samuelson et al, Semiconductor nanowires for 0D and 1D physics and applications, Physica E 25, 2004, 313–8.
[17] E. I. Givargizov, Fundamental VLS growth J. Cryst. Growth 31, 1975, 20–30.
[18] B. A. Wacaser, K. A. Dick, J. Johansson, M. T. Borgstrom, K. Deppert and L. Samuelson, Preferential interface nucleation: an expansion of the VLS growth mechanism for nanowires Adv. Mater. 21, 2009, 153–65.
[19] R. S. Wagner and W. C. Ellis, Vapor–liquid–solid mechanism of single crystal growth, Appl. Phys. Lett. 4, 1964, 89–90.
[20] B. M. Kayes, M. A. Filler, M. C. Putnam, M. D. Kelzenberg, N. S. Lewis and H. A. Atwater, Growth of vertically aligned Si wire arrays over large areas (>1 cm2) with Au and Cu catalysts Appl. Phys. Lett. 91, 2007, 103110.
[21] J. Westwater, D. Gosain, S. Pand, Control of the size and position of silicon nanowires grown via the vapor–liquid–solid technique, Japan. J. Appl. Phys., 1 36, 1997, 6204–9.
Cite This Article
  • APA Style

    Rashad Filfilan, Maha Khayyat. (2021). Ultra High Vacuum Chemical Vapor Deposition Techniques for Economic Growth of Silicon Nanowires. American Journal of Nanosciences, 7(2), 42-48. https://doi.org/10.11648/j.ajn.20210702.12

    Copy | Download

    ACS Style

    Rashad Filfilan; Maha Khayyat. Ultra High Vacuum Chemical Vapor Deposition Techniques for Economic Growth of Silicon Nanowires. Am. J. Nanosci. 2021, 7(2), 42-48. doi: 10.11648/j.ajn.20210702.12

    Copy | Download

    AMA Style

    Rashad Filfilan, Maha Khayyat. Ultra High Vacuum Chemical Vapor Deposition Techniques for Economic Growth of Silicon Nanowires. Am J Nanosci. 2021;7(2):42-48. doi: 10.11648/j.ajn.20210702.12

    Copy | Download

  • @article{10.11648/j.ajn.20210702.12,
      author = {Rashad Filfilan and Maha Khayyat},
      title = {Ultra High Vacuum Chemical Vapor Deposition Techniques for Economic Growth of Silicon Nanowires},
      journal = {American Journal of Nanosciences},
      volume = {7},
      number = {2},
      pages = {42-48},
      doi = {10.11648/j.ajn.20210702.12},
      url = {https://doi.org/10.11648/j.ajn.20210702.12},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajn.20210702.12},
      abstract = {Ultra High Vacuum Chemical Vapor Deposition (UHVCVD) reactor has been used to grow silicon nanowires via innovative economical approaches using chemical active materials as catalysts such as aluminum. Scanning Electron Microscopy has been used to study the success of the growth for further investigations and advanced applications such as solar cells. Solar manufacturers are looking for approaches to improve yield and cell efficiency and lower manufacturing costs overall. One of the main goals of this project is to tear down the various parameters involved in the current photovoltaic panels and improve it in one or more directions (properties, performance, costs). The current study is addressing the solar market with special concern of the efficiency goal. The mechanical flexibility of plastic materials is of high demands for all photovoltaic applications onto curved surfaces for architectural integration. Polycarbonate AND/OR poly methyl methacrylate encapsulation of photovoltaic modules and usage to fabricate advanced silicon nanowires solar cells can be emerging technologies delivering excellent performance and durability at a competitive cost. Although solar panels with glass protective facing still account for the majority of the installations of photovoltaic modules, however, it is expected that the adaptation of these new technologies will rapidly gain market share. The growth of silicon nanowires using chemical vapor deposition to fabricate advanced solar cells can be done via two innovative approaches. Alternative techniques for lithographic formation of the mask can provide advantages for low-cost processing, especially where a simple repeating pattern is required.},
     year = {2021}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Ultra High Vacuum Chemical Vapor Deposition Techniques for Economic Growth of Silicon Nanowires
    AU  - Rashad Filfilan
    AU  - Maha Khayyat
    Y1  - 2021/08/11
    PY  - 2021
    N1  - https://doi.org/10.11648/j.ajn.20210702.12
    DO  - 10.11648/j.ajn.20210702.12
    T2  - American Journal of Nanosciences
    JF  - American Journal of Nanosciences
    JO  - American Journal of Nanosciences
    SP  - 42
    EP  - 48
    PB  - Science Publishing Group
    SN  - 2575-4858
    UR  - https://doi.org/10.11648/j.ajn.20210702.12
    AB  - Ultra High Vacuum Chemical Vapor Deposition (UHVCVD) reactor has been used to grow silicon nanowires via innovative economical approaches using chemical active materials as catalysts such as aluminum. Scanning Electron Microscopy has been used to study the success of the growth for further investigations and advanced applications such as solar cells. Solar manufacturers are looking for approaches to improve yield and cell efficiency and lower manufacturing costs overall. One of the main goals of this project is to tear down the various parameters involved in the current photovoltaic panels and improve it in one or more directions (properties, performance, costs). The current study is addressing the solar market with special concern of the efficiency goal. The mechanical flexibility of plastic materials is of high demands for all photovoltaic applications onto curved surfaces for architectural integration. Polycarbonate AND/OR poly methyl methacrylate encapsulation of photovoltaic modules and usage to fabricate advanced silicon nanowires solar cells can be emerging technologies delivering excellent performance and durability at a competitive cost. Although solar panels with glass protective facing still account for the majority of the installations of photovoltaic modules, however, it is expected that the adaptation of these new technologies will rapidly gain market share. The growth of silicon nanowires using chemical vapor deposition to fabricate advanced solar cells can be done via two innovative approaches. Alternative techniques for lithographic formation of the mask can provide advantages for low-cost processing, especially where a simple repeating pattern is required.
    VL  - 7
    IS  - 2
    ER  - 

    Copy | Download

Author Information
  • Midra Tower, Saudi Aramco, Dhahran, Saudi Arabia

  • Materials Science Research Institute, King Abdullaziz City for Science and Technology, Riyadh, Saudi Arabia

  • Sections